All Pages
There are elements common to all CalmView pages which can be customised, such
as the simple search button (available at the top right of a page) and the
footer containing a link to the site map. Here is an
example home page, showing
these elements in the top bar. Please note: the example screen will open a new
window, when you have finished and wish to return to this page, use the cross in the top right corner to close the window.
The following options are customised using the All Pages option in the Pages section of the Configurator.
Fields highlighted in red in the Configurator are mandatory.
Font switcher
As in the example above, the font switcher appears as three different sized boxes containing the letter A, on the top left of every CalmView page.
This allows users of your website to adjust the size of the font being displayed.
When CalmView is supplied the font switcher is set to appear, to change this,
un-check the Font visible option in the Configurator and click the
button.
There are three tooltips which are displayed as you hover over the different
sized fonts shown in the font switcher. These default to 'Change font size to
medium', 'Change font size to large' and 'Change font size to largest'. To
change of any these tooltips, enter your new text in the Medium tool tip, Large
tool tip or Largest tool tip field and click the
button.
Style switcher
As in the example above, the style switcher appears as a button with the text 'Text only',
on the top left of every CalmView page by default. It can be clicked on, to change the
style of the display to text only i.e. remove all styling, it then toggles to a button with the text 'Graphical
View', this can be clicked on to return to the previous display style.
To change
the no style text that appears on the button (defaults to 'Text only'), enter your new text in
the No style text field and click the
button. To change the tooltip
that appears when you hover over this button ('Remove all styling' by default), enter your new text in the
Default style tooltip
field and click the
button.
To change
the default style text that appears on the button (defaults to 'Graphical View'), enter your new text in
the Default style text field and click the
button. To change the tooltip
that appears when you hover over this button ('Apply default styling' by default), enter your new text in the
Default style tooltip
field and click the
button.
Search
As in the example above, the simple search entry box and button appear on the
top right of every CalmView page.
To change the text that appears on the search
button (defaults to 'Search'), enter your new text in the Search button field
and click the
button.
To change the tooltip that appears when you hover over this search button
('Quick search' by default), enter your new text in the Search ToolTip field and
click the button.
My Items Summary
The following settings apply to the My Items summary area that is shown at the top of every CalmView page, to the left of the quick search input box. This summary area only appears when 'My Items' is chosen in the configurator.Summary text
The text that appears as the link in the summary area, it defaults to 'My
Items (n)' where 'n' is the number of items currently in the My
Items list. To change the text that appears, enter your new text in the Summary
text field - using {0} where you wish to automatically insert the number of
items - and click the
button.
Go to basket text
This setting is no longer used.
No. of items in your basket
As an item is added to the 'My Items' basket, a pop-up message is shown. The
text defaults to 'Item 'identifier' has been added to your items', where
'identifier' is the RefNo or Altrefno of the item from the Calm catalog
record. Whether RefNo or AltRefNo is used is configured
here. To change
the pop-up text, enter your new text in the No. of items in your basket field -
using {0} where you wish to automatically insert the identifier -
and click the
button.
Item exists message
If the researcher tries to add an item that is already in the 'My Items'
basket, a pop-up warning is displayed and nothing is added to the basket. The
text of the pop-up warning defaults to 'Item 'identifier' is already in
your items', where 'identifier' is the RefNo or Altrefno of the item from the
Calm catalog record. Whether RefNo or AltRefNo is used is configured
here.
To change the pop-up warning, enter your new text in the Items exists message
field - using {0} where you wish to automatically insert the identifier - and click the
button.
My Items Basket
The following settings are used on the 'My Items' page, which shows a list of items placed in the basket, with options to order them or remove them from the basket. This page is displayed when the link in the My Items summary (near the top of each page) is clicked.Order items text
The text that appears on the button to order the selected items (the ones
with their checkbox ticked). The text on this button defaults to 'Order selected items
for viewing', to change this enter your new text in the Order items text field
and click the
button.
Preview items text
The text that appears on the button to display a print preview of the My
Items basket. The text on this button defaults to 'Print preview', to change
this enter your new text in the Preview items text field and click the
button.
The warning message that appears if a user clicks to order items with no
items selected. The text defaults to 'Please select at least one orderable item
before proceeding', to change this enter your new text in the Select one item
text field and click the
button.
Count of basket items
Text (displayed just underneath the page header) that gives a total number of
items currently in the My Items basket. The text defaults to 'You currently have
n item(s) in your basket' where n is the number of items. To
change this, enter your new text in the Count of basket items field - using {0}
where you wish to automatically insert the total - and click the
button.
Basket Editor Control ID
The heading for the column that contains the identifier of the item, which is
taken from the RefNo or AltRefNo
field of the Calm Catalogue record. Whether RefNo or AltRefNo is used is configured
here. The text for this column heading
defaults to 'ID', to change this enter your new text in the Basket Editor
Control ID field and click the
button.
Description column heading
The heading for the column that contains the description of the item, which
is taken from the Title or
Description field of the Calm Catalogue record. Whether Title or
Description is used is configured
here. The text for this column
heading defaults to 'Title', to change this enter your new text in the
Description column heading field and click the
button.
Orderable column heading
The heading for the column that contains checkboxes which a user ticks to
order an item. The text for this column heading defaults to 'Order', to change
this enter your new text in the Orderable column heading field and click the
button.
Remove column heading
The heading for the column that contains buttons to remove a particular item
from the basket. The text for this column heading defaults to 'Remove', to
change this enter your new text in the Remove column heading field and click the
button.
Basket page title
The text for the title that appears on the print preview of the My Items
basket. The text for this title defaults to 'My Items', to change this enter
your new text in the Basket page title field and click the
button.
Print basket button text
The text that appears on the button to print the My Items basket from the
print preview. The text on this button defaults to 'Print Basket', to change
this enter your new text in the Print basket button text field and click the
button.
Order button text
This setting is not used in the current
version of CalmView.
Remove item label
The text that appears on the button to remove an item from the basket. The
text on this button defaults to 'Remove Item', to change this enter your new
text in the Remove item label field and click the
button.
Change password form
The following settings are used on the Change Password page,
for a logged in user to change their password. This page is displayed when the
link in the User summary area (near the top of each page) is clicked.
The text that is displayed when a user successfully changes their password. The text defaults to 'Password has been successfully changed', to change this enter your new text in the Password changed text field and click the
button.Passwords mismatched text
The warning message that appears if the user
types their new password differently in the two boxes i.e the new password entry
and the re-type new password entry. The text defaults to 'New password chosen
and re-typed new password are not the same. Please try again.', to change this
enter your new text in the Passwords mismatched text field and click the
button.
Old and new passwords mismatch text
The warning message that appears if the user types their old (current)
password incorrectly. The text defaults to 'Old password entered does not
match your current password. Please try again.', to change this enter your new
text in the Old and new passwords mismatch text field and click the
button.
Save button text
The text that appears on the button to update the password to the new one
entered. The
text on this button defaults to 'Update', to change this enter your new
text in the Save button text field and click the
button.
Enter new password text
The warning message that appears if the user omits to type their new
password (in the first entry box), as this is mandatory before the password can be changed. The
text defaults to 'Please enter your new password', to change this enter your new
text in the Enter new password text field and click the
button.
Enter password text
The warning message that appears if the user omits to type their old
(current)
password, as this is mandatory before the password can be changed. The
text defaults to 'Please enter your password', to change this enter your new
text in the Enter password text field and click the
button.
Field required text
It is not possible to set this in the current version of CalmView.
Mandatory field symbol
The symbol that is shown next to a field to indicate that it is mandatory. On
this page, all three entry fields are mandatory. The mandatory field symbol will
only appear if the user press the Update button without an entry in that
particular field. The symbol defaults to '*', to change this enter your
new symbol in the Mandatory field symbol field and click the
button.
New password text
The text that prompts for the new password to be entered the first time, it is
displayed next to the entry box. The text defaults to 'New Password:', to
change this enter your new text in the New password text field and click the
button.
Old password text
The text that prompts for the old (current) password, it is displayed next to
the entry box. The text defaults to 'Old Password:', to change this enter
your new text in the Old password text field and click the
button.
Re-enter password text
The warning message that appears if the user omits to re-type their new
password, as this is mandatory before the password can be changed. The
text defaults to 'Please re-enter your password', to change this enter your new
text in the Re-enter password text field and click the
button.
Re-type password text
The text that prompts for the new password to be entered the second time, it is
displayed next to the entry box. The text defaults to 'Re-type new
Password:', to change this enter your new text in the Re-type password text
field and click the
button.
Choose order date form
The following settings are used on the Choose order date/calendar page for document ordering. This page is displayed when items in the basket are selected and the Order button is pressed.Choose an order date text
The text that is shown above the calendar to prompt for an order date to be
entered. The text defaults to 'Please choose an order date from the calendar:',
to change this enter your new text in the Choose an order date text field and
click the
button.
No date has been chosen text
The warning message that appears if the user clicks the Place Order button
without having chosen/entered an order date. The default text is 'Please choose
a date before continuing', to change this enter your new text in the No date has
been chosen text field and click the
button.
Order date is blank text
This setting is not used in the current version of CalmView.
Date is not in correct format text
The error message that appears if the user enters a date in an invalid
format, for example yyyy/mm/dd. The default text is 'Please enter a valid date
in the format of dd/mm/yyyy', to change this enter your new text in the Date is
not in correct format text field and click the
button.
Date is in the past text
The error message that appears if the user enters a date in the past. The
default text is 'Order date cannot be before todays date. Please try again', to
change this enter your new text in the Date is in the past text field and click
the
button.
Closed date chosen error message
The error message that appears if the date entered is a closed day (set in
Calm). The default text is 'Closed date has been chosen. Please try again', to
change this enter your new text in the Closed date chosen error message field
and click the
button.
Policies text on choose order date
The text that states your organisation's policies involved in producing
items on a particular day (if any), this is displayed underneath the calendar.
There is no default text, to add some, enter your text into the Policies text on
choose order date field and click the
button.
Confirm order form
The following settings are used on the Confirm order form. This page appears
once the 'Place Order' button has been clicked and it confirms whether items
will be available on the chosen date or not.
ID column heading
The heading for the column that contains the identifier of the item, which is
taken from the RefNo or AltRefNo
field of the Calm Catalogue record. Whether RefNo or AltRefNo is used is configured
here. The text for this column heading
defaults to 'ID', to change this enter your new text in the ID column heading field and click the
button.
Description column heading
The heading for the column that contains the description of the item, which
is taken from the Title or
Description field of the Calm Catalogue record. Whether Title or
Description is used is configured
here. The text for this column
heading defaults to 'Title', to change this enter your new text in the
Description column heading field and click the
button.
Items available text
The text that appears above the table of items. This defaults to 'The
following items will be available on:dd/mm/yyyy' where dd/mm/yyyy
is the order date. To change this, enter your new text in the Items available
text field and click the
button.
View my orders form
A logged in user can review all past and pending orders by clicking the 'My
Orders' link at the top right of the page. This page shows orders under the past
and pending tabs, grouped by date.
There are no orders text
The text that appears if the currently logged in user has no past or pending
orders. This text defaults to 'There are currently no orders', to change this,
enter your new text in the There are no orders text field and click the
button.
No past orders text
If the currently logged in user has pending orders, but no past orders, this
text will be shown under the Past Orders tab. This text defaults to 'There are
currently no past orders', to change this, enter your new text in the No past
orders text field and click the
button.
No pending orders text
If the currently logged in user has past orders, but no pending orders, this
text will be shown under the Pending Orders tab. This text defaults to 'There
are currently no pending orders', to change this, enter your new text in the No
pending orders text field and click the
button.
Past Order Description column heading
When the past orders tab is clicked, only past orders are shown. Under this
tab, the heading for the column that contains the description of the item, which
is taken from the Title field of the Calm Catalogue record. The text for this column
heading defaults to 'Title', to change this enter your new text in the
Past Order Description column heading field and click the
button.
Past Order ID column heading
When the past orders tab is clicked, only past orders are shown. Under this
tab, the heading for the column that contains the identifier of the item, which
is taken from the RefNo field of the Calm Catalogue record. The text for this column
heading defaults to 'ID', to change this enter your new text in the Past Order
ID column heading field and click the
button.
Pending Orders ID column heading
When the pending orders tab is clicked, only pending orders (not yet issued
via Calm) are shown. Under this tab, the heading for the column that contains the
identifier of the item, which
is taken from the RefNo field of the Calm Catalogue record. The text for this column
heading defaults to 'ID', to change this enter your new text in the Pending
Orders ID column heading field and click the
button.
Pending Order Description column heading
When the pending orders tab is clicked, only pending orders are shown. Under
this tab, the heading for the column that contains the description of the item, which
is taken from the Title field of the Calm Catalogue record. The text for this column
heading defaults to 'Title', to change this enter your new text in the
Pending Order Description column heading field and click the
button.
Cancel order item button text
Items under the pending orders tab will show a Cancel Order Item button next
to each of them. The text on this button defaults to 'Cancel Order Item', to
change this enter your new text in the Cancel order item button text field and
click the
button. (The user can also cancel the complete order, see the next setting).
Cancel order button text
Orders under the pending orders tab will show a Cancel Order button. The text
on this button defaults to 'Cancel Order', to change this enter your new text in
the Cancel order button text field and click the
button. (The user can also cancel individual items on an order, see the setting
above).
Specific instructions for users
By default there is no text in this field. If your organisation has any
specific instructions for researchers about orders, they can be shown underneath
the header on the orders page, by entering your text in the Specific
instructions for users field and clicking the
button.
The text that appears on the Past Orders tab. By default, the text is 'Past
Orders', to change this enter your new text in the Past Orders Heading field and
click the
button. This is also shown on the print preview of orders.
Pending Orders Heading
The text that appears on the Pending Orders tab. By default, the text is
'Pending Orders', to change this enter your new text in the Pending Orders
Heading field and click the
button. This is also shown on the print preview of orders.
Orders Page Title
The heading on the print preview of orders. This text defaults to 'View My
Orders', to change this enter your new text in the Orders Page Title field and
click the
button.
All Orders Heading Text
The text on the All Orders tab on the print preview. This tab shows a
combination of past and pending orders. The text defaults to 'All Orders', to
change this enter your new text in the All Orders Heading Text and click the
button.
Print button text
The text that appears on the Print Orders button on the print preview page.
By default the text is 'Print Orders', to change this enter your new text in the
Print button text field and click the
button.
Register New User Form
This is the first page that appears when a new user is registering (or if
terms and conditions exist, it appears after the terms and conditions page). The
user is asked to enter a User ID and password.
This setting is not used in the current
version of CalmView.
Passwords mismatched text
The warning message that appears when the user
has not re-typed the password correctly i.e. there are different entries in the 2 password
boxes. This text defaults to 'Passwords entered do not match. Please try again',
to change this enter your new text in the Passwords mismatched text field and click the
button.
Password text
The text next to the password entry box. By default this text is
'Password:', to change this type your new text in the Password text field
and click the
button.
Retype password text
The text next to the confirm/re-type password entry
box. By default this text is 'Re-type Password:', to change this type your new
text in the Retype password text field and click the
button.
User exists text
The warning message that appears if the user enters an ID that has already
been used (existing user has this ID). This text defaults to 'User already
exists. Please try again', to change this type your new text in the User exists
text field and click the
button.
Username text
The text next to the user id entry box. By default this text is 'User ID:',
to change this type your new text in the Username text field and click
the
button.
Offline Document Order form
If the offline method of document
ordering has been configured,
this form will appear when an item/s is ordered.
The text that is shown next to the date on the email request for an item/s.
By default this text is 'Date:', to change this enter your new text in the Date
text field and click the
button.
Description text
The text that is shown as a column heading on the email request for an
item/s. By default this text is 'Description', to change this enter your new
text in the Description text field and click the
button.
Email text
The text that appears next to the email entry box. This text defaults to
'Email:', to change this enter your new text in the Email text field
and click the
button.
Name text
The text that appears next to the name entry box. This text defaults to
'Name:', to change this enter your new text in the Name text field and click the
button.
RefNo text
The text that is shown as a column heading on the email request for an
item/s. By default this text is 'RefNo', to change this enter your new text in
the RefNo text field and click the
button.
Special requests text
The text that appears next to the special requests entry box. This text
defaults to 'Special Requests:', to change this enter your new text in the
Special requests text field
and click the
button.
Subject line text
This setting is not used in the current
version of CalmView.
User text
The text that is shown next to the user's name on the email request for an
item/s. By default this text is 'User:', to change this enter your new text in
the User text field and click the
button.
Document Ordering form
This page appears when some/all of the order items are unavailable, for example they have already been booked for that day.
Item availability check text
This setting is not used in the current version of CalmView.
Completed orders text
This setting is no longer used.
Make changes to order text
This setting is no longer used.
Order button text
This setting is not used in the current version of CalmView.
Unavailable items text
The text that appears underneath the table of unavailable items, in the form
of a warning message that these items will need to be re-ordered on a different
day. This text defaults to 'Please Note: Unavailable items will need to be
re-ordered for another date', to change this enter your new text in the
Unavailable items text field and click the
button.
Remove Item column heading
This setting is not used in the current version of CalmView.
Item not available text
The text that appears above the table of unavailable items, explaining what
the table shows. This text defaults to 'Some items were not available on your
requested date of:', to change this enter your new text in the Item not
available text field and click the
button. On screen this text is followed by the requested order date.
Description column heading
The text displayed as the heading for the description column of the
unavailable items table. This text defaults to 'Description', to change this
enter your new text in the Description column heading field and click the
button.
OrderBasketEditorControl_IDlabeltext
The text displayed as the heading for the ID column of the unavailable items
table. This text defaults to 'ID', to change this enter your new text in the OrderBasketEditorControl_IDlabeltext
field and click the
button.
OrderBasketEditorControl_OrderText
The text displayed as the heading for the Order column of the unavailable
items table. This text defaults to 'Order', to change this enter your new text
in the OrderBasketEditorControl_OrderText field and click the
button.
Status column heading
The text displayed as the heading for the Status column of the unavailable
items table. This text defaults to 'Status', to change this enter your new text
in the Status column heading field and click the
button.
Wizard pages for document ordering process
Change order date button textThe text that appears on the Change Date
button if an ordered item is unavailable. The text defaults to 'Change Date', to
change this enter your new text in the Change order date button text field and
click the
button.
Choose order date page button text
The text that appears on the Place Order button on the order date calendar
page. This text defaults to 'Place Order', to change this enter your new text in
the Choose order date page button text field and click the
button.
Finish button text
The Confirm order form appears once the 'Place Order' button has been
clicked, it confirms whether items will be available on the chosen date or not. The text that appears on the button on the Confirm order form defaults to 'Finish', to
change this enter your new text in the Finish button text field and click the
button.
Order Availability page order button text
If one/some of the items on an order are not available on the chosen date,
but other/s are, the order availability page is shown. This setting is for the
text shown on the button on this page. The default is 'Order Available items for
viewing', to change this enter your new text in the Order Availability page
order button text field and click the
button.
Print Preview button for order form
Print preview button textWhen the 'View my orders' link in the user
area is clicked, all pending and past orders for this user are shown. This
setting is the text that appears on the button on this page. The default text is
'View print preview of orders', to change this enter your new text in the Print
preview button text field and click the
button.
Register user link at the top of each page in website
Register user link textThe text that appears as the link to register a
new user. This link appears in the user area at the top right of each page, if
user registration is
selected in the configurator. This text defaults to 'Register user', to
change it enter your new text in the Register user link text field and
click the
button.
Unauthorised access message
The text of the error message that appears when someone tries to access a
page where user login is required - such as view my orders, change password or
edit user profile - and no user is currently logged in. An example of this error
would be if a session has timed out (which automatically logs the user out) and
then an attempt is made to access a page where user login is required. By
default the text is 'This page cannot be viewed currently as document ordering
features have been switched off. Use the back button on your browser to go back
to the page you were viewing.' to change this enter your new text in the
Unauthorised access message field and click the
button.
User registration terms and conditions page
This page appears first during user registration (providing Terms and conditions text - as below - isn't left blank).
Read terms and conditions text
This text appears above the terms and
conditions text box. It defaults to 'Please read the following Terms and
Conditions carefully', to change this enter your new text in the Read terms and
conditions text field and click the
button.
Terms and conditions text
This text appears in the terms and conditions text box. It defaults to 'Axiell
Copyright(C) 2010-2011. Use the configurator to set your terms and conditions.',
to change this enter your new text in the Terms and conditions text field and
click the
button.
Accept text
The text that appears next to the Accept radio button. It defaults to
'Accept', to change this enter your new text in the Accept text field and click
the
button.
Declaration text
This text is the declaration that appears underneath the terms and conditions
text box. It defaults to 'I have read, understood and agree to the terms and
conditions', to change this enter your new text in the Declaration text field
and click the
button.
Do not accept text
The text that appears next to the Do Not Accept radio button. It defaults to
'Do Not Accept', to change this enter your new text in the Do not accept text
field and click the
button.
Accept Terms Validation Message
If the user clicks the Next button without selecting a radio button to
either accept or not accept the terms and conditions, this warning message will
be displayed. The text defaults to 'Please Accept terms and conditions before
continuing', to change this enter your new text in the Accept Terms Validation
Message field and click the
button.
User forms
The following settings are used for various document ordering pages, including offline document ordering.
Incorrect user/password text
This setting is not used in the current version of CalmView.
Email sent confirmation text
When offline document ordering is being used, this
confirmation text appears when the email request for an order has been sent. The
text defaults to 'Message has been successfully sent', to change this enter your
new text in the Email sent confirmation text field and click the
button.
User not logged in text
This setting is not used in the current version of CalmView.
Server error text
This setting is not used in the current version of CalmView.
User exists text
This setting is not used in the current version of CalmView.
Email button text
When offline document ordering is being used, this text appears on the button
on the order form. The text defaults to 'Email request', to change this enter
your new text in the Email button text field and click the
button.
Save button text
The text on the button that is displayed on the Edit User Profile
page. By default this text is 'Save', to change this enter your new text in the
Save button text field and click the
button.
Email text
It is not possible to set this in the current version of CalmView.
Enter valid email text
When offline document ordering is being used, this error message appears on
the order form if the email address entered does not have the correct format for
an email address. By default this text is 'Please enter a valid email address',
to change this enter your new text in the Enter valid email text field and click
the
button.
Required field text
When offline document ordering is being used, this error message appears on
the order form if a name and/or email address aren't entered. By default this text is
'This is a required field', to change this enter your new text in the Required
field text field and click the
button.
Username text
It is not possible to set this in the current version of CalmView.
User login page
This page appears when the Log in link found at the top right of a page is
clicked. It requests the user ID and password.
This error message appears
if an unrecognised user ID or password is entered. The text defaults to 'Incorrect
username or password has been entered. Please try again.' to change this enter
your new text in the Incorrect username or password entered text field and click
the
button.
Login page title
The title that is displayed at the top of the page when a user is logging
in. The text defaults to 'Login Page', to change this enter your new text in the
Login page title field and click the
button.
Login page initial text
The text that appears underneath the title. This text defaults to 'Welcome to
Calm View. Please log in or alternatively if you are a new user, please register
using the link below.', to change this enter your new text in the Login page
initial text field and click the
button.
Options at the top of each page in website
The following are links that appear in the user area at the top right of each
page.
This link appears when a user is currently logged in. By default the text is 'Change Password', to change this enter your new text in the Change password text field and click the
button.Edit profile form title
This link appears when a user is currently logged in. By default the text is
'Edit Profile', to change this enter your new text in the Edit profile form
title field and click the
button.
Login link text
The text for the Log in link, by default this is 'Log
in', to change this enter your new text in the Login link text field and click
the
button.
Logout link text
This link appears when a user is currently logged in. By default the text is
'Logout', to change this enter your new text in the Logout link text field and
click the
button.
My Orders page link text
This link appears when a user is currently logged in. By default the text is
'My Orders', to change this enter your new text in the My Orders page link text field
and click the
button.
Welcome text
This text appears when a user is currently logged in. By default the text is
'Welcome User ID', where User ID is the user ID of the currently
logged in user. To change this default, enter your new text in the Welcome text
field - using {0} where you wish to automatically insert the user ID - and click the
button.
Welcome page for logged in user
Where a user logs in, a welcome page appears. The following settings are available for this welcome page.
Continue button text
The text that appears on the button on this page. By
default the text is 'Continue', to change this enter your new text in the
Continue button text field and click the
button.
Welcome text
The second piece of text that appears on this page. By default the text is
'Welcome to CalmView', to change this enter your new text in the Welcome text
field and click the
button.
Welcome page main text
The first piece of text that appears on this page. By default the text is
'Welcome User ID', where User ID is the user ID of the user that
has just logged in. To change this default, enter your new text in the Welcome
page main text field - using {0} where you wish to automatically insert the user
ID - and click the
button.
User registration complete page
The final page that appears when a user is registering. It reminds the user of the User ID they have chosen and asks them to record it.
Welcome new user message
The welcome text that appears above the User ID
message. By default the text is 'Welcome.', to change this enter your new text
in the Welcome new user message field and click the
button.
User Registration page redirect message
If user registration re-direct has been enabled, this is the message that
appears before the page redirects. By default the text is 'Page is redirecting.
Please wait...', to change this enter your new text in the User Registration
page redirect message field and click the
button.
Footer
As in the example at the top of this page, every CalmView page displays a footer which contains
quick links (to other pages).
To change the text that appears as the heading in the footer (defaults to 'Quick
links:'), enter your new text in the Title field and click the
button.
To change the text that appears as the site map link in the footer (defaults to 'Site
Map'), enter your new text in the Sitemap field and click the
button.