EXE Folder
The place where all executable files are stored.
Standalone Configuration
Suggested location: 'C:\DScribe\bin\peer'.
Contains:
| DScribe.EXE | The main front-end executable |
| DSAdmin.EXE | Database Administrator program |
| Accuisr5.DLL | Image display library |
| Idle.DLL | Indexing engine |
| Utility.DLL | Utility routines |
| Tcl82.dll * | Tcl library |
| cw3215.dll * | Helper library for above |
| DSiv.EXE * | Image viewer (optional) |
| Gear32pd.dll * | Image library (optional) |
*These files can be stored in the \Windows\System or \Windows\System32 folders (depending on your operating system).
Client/Server Configuration: Client
Suggested location: 'C:DScribe\bin\client'.
Contains:
| DScribe.EXE | The main front-end executable |
| Accuisr5.DLL | Image display library |
| Ic.DLL | Network interface stub: must be renamed to 'Idle.DLL' |
| Utility.DLL | Utility routines |
| Tcl82.dll * | Tcl library |
| cw3215.dll * | Helper library for above |
| DSiv.EXE * | Image viewer (optional) |
| Gear32pd.dll * | Image library (optional) |
*These files can be stored in the \Windows\System or \Windows\System32 folders (depending on your operating system).
Client/Server Configuration: Server
Suggested location: 'C:\DScribe\bin\server'. DSAdmin.EXE Database Administrator
program You run the
client EXEs on the server, just keep them in separate folders. The client
EXEs always understand '.' as meaning the 'current machine', so for example, a
DSAdmin command line on the server might contain: C:\DScribe\bin\client\DSAdmin.exe /server
Disservi.EXE
NT Service
Idle.DLL
Indexing engine
Utility.DLL
Utility routines
Client/Server Configuration: Either Client or Server or
both